CC-PDIS01 Honeywell Power module Brand new

 When you select the pulse input channel type as Pulse Input with Fast Cutoff

for Fast Cutoff channels (channel 7 and channel 8), Single Stream is selected

by default and is non-editable.

l When you select the pulse input channel type as Pulse Input, you can

configure Dual Stream on the Fast Cutoff channels (channel 7 and channel 8).

l Dual Stream option is not applicable for Fast Cutoff channels (channel 7 and

channel 8) when the Pulse Input Channel type as Pulse Input with Fast Cutoff.

In this scenario, the option Single Stream is selected by default and is noneditable.

l If you select the Input Stream Type as Dual Stream for odd-numbered

channels, then you cannot configure their associated even numbered

channels. For example, if you have configured channel 1 as Dual Stream, you

cannot configure channel 2. In addition, the associated channel does not

appear in the tree view if you have configured the channel for Dual Stream.

l If the CM already contains the even-numbered channel and you try to

configure its associated odd-numbered channel as Dual Stream, an error

message appears. You need to delete the associated even-numbered channel

from the CM. For example, if a CM contains channel 3 and channel 4, and you

try to configure channel 3 as Dual Stream, an error message appears. You

need to delete channel 4 to configure channel 3 as Dual Stream.

l When a channel is configured for Dual Stream, the Status Data tab of the PIM

does not display any values for the associated channel in the Monitoring view.

For example, if you have configured channel 3 for Dual Stream, the channel 4

row in the Status Data tab does not display any values.