8c-pdoda1 Honeywell

Event pen function

If Function prompt “PEN 1IN” under Set-up prompt “PEN 1” has been configured as DGTL1 or DGTL2,

the pen (channel) operates as an “event pen” and tracks the remote contact (switch) closure by way of the 

digital 1 or digital 2 input wired to the alarm output/digital input printed circuit board.

Event pen operation

When the switch opens, the pen for the channel tracks at the configured OFF position (0-100%) on the 

chart.

When the switch closes, the pen tracks at the configured ON position (0-100%) on the chart and tracks at 

this position until the switch is opened.

Thus, the “Event Pen” record makes it easy to monitor the on/off operation of an external event.

5.15 Maximizing Pen Life

Steps for maximizing pen life

87HTable 5-29 lists nine steps that will help to maximize the life of your chart pen.

Table 5-29 Maximizing pen life

Step Action

1 Store the chart paper in a cool, clean dry place where the temperature does not exceed 40°C 

(104°F) and the humidity is below 65% RH.

2 Do not expose the pen tip and chart paper to abrasive chemicals or dust that cause excessive 

pen wear.

3 If the recorder is used in a dusty atmosphere, provide a positive ‘clean air purge’ to minimize 

dust particle accumulation on the chart paper.

4 Periodically clean the pen arm using a cotton swab dipped in alcohol. This is more important 

when the recorder is located in a dusty environment and no ‘clean air purge’ is used.

5 Never let the pen tip ride on the chart plate when the paper is not present. Use the pen lifter to 

raise the arm when changing the paper.

6 Keep the door closed while recording.

7 Always insert the pen arm tip into the shipping sponge when storing or shipping the recorder.

8 Be sure that the chart paper lays flat against the chart plate. Any ripple in the paper will cause 

light pen printing.

9 Be sure the chart hub assembly is pushed onto the motor shaft so that it is flush with the chart 

plate.

We have the same series of models in stock. If you don't find the model you need, please contact us and we will provide you with an official quotation！