620-0071   Honeywell   Programmable controller Brand new

620-0071 Honeywell Programmable controller Brand new

If multiple instruments need a ground reference the four positions of TB2 can serve as those ground points (assuming the JP17-JP20) jumpers are intact. If more than four grounding screws are needed then a custom wire from TB2 to a separate terminal block can allow for more grounding screw positions.

Brand:HONEYWELL   Model number620-0071

Colour:new                  Warranty: 12 months

Lead Time:3-day working day   Country of origin: USA

Price: Please contact us         Product weight:0.22kg

hipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account 

Servce: Professional Sales provides 24 hours /7 days online service

620-0071   Honeywell   Programmable controller Brand new 


        

image.png



ATTENTION

The fuse, F1, can be removed or replaced only after verifying that the location is nonhazardous.

To re-install the FOE IOTA F1 fuse

1. Using the fuse and cap from section 13.3.3, place the fuse in the fuse cap and insert it back

into the fuse holder on the IOTA board.

2. Tighten the fuse cap rotating it clockwise a quarter-turn, using a small slotted screwdriver.

3. This completes the procedure.

13.3.7 Connecting the fiber optic cables to the FOE module

ATTENTION

Unused optical ports should always have protective covers on them to prevent dust and

other contaminants from accumulating on the glass fiber optic interfaces.

Fiber-optic ST-type connectors may be removed, or replaced, while active and in a Zone 2 or

Division 2 hazardous area.

Clean and inspect the fiber optic cable endfaces per IEC-61300-3-35 at time of installation or

any time the fiber cables are removed and reinstalled into the FOE Tx/Rx ports. Do not skip

this critical step. A 200x/400x optical fiber microscope is required for verification. Failure to

meet specification may result in communication errors or undesired operation.

Prerequisites

Before connecting the FOE module's power cable to the module:

Refer to FOE connection rules.

To connect the FOE cables to the FOE module

1. Ensure the dust caps are removed from the ST optical ports on the FOE module. Remove the

dust caps by rotating the cap counter-clockwise to disengage from the locking tab.



.


.


We have the same series of models in stock. If you don't find the model you need, please contact us and we will provide you with an official quotation!

HONEYWELL    30750338-005    

HONEYWELL    51403393-100    

HONEYWELL    30751044-4    

HONEYWELL    30751044-009    

HONEYWELL    30751044-7    

HONEYWELL    51403393-200    

HONEYWELL    4DP7APXIO211    

HONEYWELL    30750318-2    

HONEYWELL    30750318-3    

HONEYWELL    51196882-100    

HONEYWELL    51304095-100    

HONEYWELL    51400997-200    

HONEYWELL    51401088-100    

HONEYWELL    51400926-100    

HONEYWELL    51304537-100    

HONEYWELL    51401583-200    

HONEYWELL    51401583-100    

HONEYWELL    51401996-100    

HONEYWELL    51304421-100    

HONEYWELL    51304441-175    

HONEYWELL    51107137-117    

HONEYWELL    51196654-100    

HONEYWELL    51196653-100    

HONEYWELL    51400712-100    

HONEYWELL    51204166-175    

HONEYWELL    51401201-100    

HONEYWELL    51401577  



You are welcome to make an inquiry


E-mail:


free@fenoux.com


Tel.:


+86 133 7698 4225


Skype:


+86 133 7698 4225


WhatsApp:


+86 133 7698 4225




Copyright © Hong Kong Saul Electric Co., Ltd. All Rights Reserved Sitemap

Follow Us
Disclaimers: All trademarks on the website are not owned by us. If there is any infrigement, wecan replace them at any time.