51402625-175 Honeywell Controller module Brand new

Function

The Analog Output (AO) Module delivers high-level constant current to actuators and recording/indicating devices. 

Notable Features

• Extensive self-diagnostics

• Optional redundancy

• Safe-state (FAILOPT) behaviors configurable on a 

per channel basis

• Output read-back and alarm on discrepancy

• Non-incendive output

FAILOPT

Series C AO module supports the FAILOPT parameter on a per channel basis. The user can configure each channel to 

either HOLD LAST VALUE, or SHED to a SAFE VALUE. The Output will always go to zero, the safe state, if the IOM 

device electronics fails.

Open-wire Detection

This Series C IO function will be able to detect and annunciate open field wire with a Channel Soft Failure indication 

Detail Specifications – High Level Analog Output

Parameter Specification

Input / Output Model CC-PAON01 - High-Level Analog Output 

IOTA Models CC-TAON01 Non-Redundant 6”

CC-TAON11 Redundant 12”

Output Type 4-20 mA

Output Channels 16

Output Ripple < 100 mV peak-to-peak at power line frequency, across 250 

W load

Output Temperature Drift 0.005% of Full Scale/°C

Output Readback Accuracy ±4% of Full Scale

Output Current Linearity ± 0.05% of Full Scale nominal

Resolution ± 0.05% of Full Scale

Calibrated Accuracy ± 0.35% of Full Scale (25oC) including linearity

Directly Settable Output Current Range 0 mA, 2.9 mA to 21.1 mA

Maximum Resistive Load

(24 V supply = 22 VDC through 28 VDC)

800 ohms

Maximum Output Compliant Voltage

(24 V supply = 22 VDC through 28 VDC)

16 V

Maximum Open Circuit Voltage 22 V

Response Time(DAC input code to output) Settles to within 1% of final value within 80 ms

Experion Series-C I/O Specification, EP03-490-520 28

Version 1.5 Honeywell Proprietary Dec 2021

Parameter Specification

Gap (0 mA) of Output to Field on Switchover 10 ms maximum (applies to Redundancy only)