30732439-3    Honeywell     Central control module Brand new

30732439-3 Honeywell Central control module Brand new

Because the maximum transmitter output level is -7 dB, and the maximum receiver input level is -10 dB, the receiver may be overdriven on a short link and may require a 3 dB attenuator. Connector allowances for the transmitter and receiver are included in the above power declaration.

Brand:HONEYWELL   Model number30732439-3 

Colour:new                  Warranty: 12 months

Lead Time:3-day working day   Country of origin: USA

Price: Please contact us         Product weight:0.22kg

hipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account 

Servce: Professional Sales provides 24 hours /7 days online service

30732439-3    Honeywell     Central control module Brand new 


        

image.png




ATTENTION

When any failure that results in a switchover occurs in a Secondary module, the Secondary

module loses synchronization.

In addition to the failure conditions, this event is reported as diagnostic notification:

l Loss of view of redundant partner on network.

l Loss of private path connection from Primary to Secondary (lonely event).

The following table identifies failure conditions that result in a switchover and those that do not.

Failure conditions that result in a switchover Failure conditions that do not

result in a switchover

Power to Primary module fails. One or all cables fail.

An IOLINK to the Primary Series C module is lost. One or all network conditioners fail.

Primary Series C module fails. All supplied power to the link fails.

Table 9.2 Failure conditions that result in switchover

9.4 Configuration tools to create control strategies

The Experion Control Builder application creates control strategies that use Series C I/O data. In

developing a valid control strategy, the following activities are required to be supported by Control

Builder:

l create hardware blocks,

l associate blocks,

l assign modules,

l assign devices, and

l load components.

Regardless of what tool is used to configure Series C I/O, the IOM must be present during

configuration load. If the IOM is not present load errors will occur and a subsequent reload or

checkpoint restore will be required.

Refer to the Control Building Guide to create control strategies.


.


.


We have the same series of models in stock. If you don't find the model you need, please contact us and we will provide you with an official quotation!

HONEYWELL    30750338-005    

HONEYWELL    51403393-100    

HONEYWELL    30751044-4    

HONEYWELL    30751044-009    

HONEYWELL    30751044-7    

HONEYWELL    51403393-200    

HONEYWELL    4DP7APXIO211    

HONEYWELL    30750318-2    

HONEYWELL    30750318-3    

HONEYWELL    51196882-100    

HONEYWELL    51304095-100    

HONEYWELL    51400997-200    

HONEYWELL    51401088-100    

HONEYWELL    51400926-100    

HONEYWELL    51304537-100    

HONEYWELL    51401583-200    

HONEYWELL    51401583-100    

HONEYWELL    51401996-100    

HONEYWELL    51304421-100    

HONEYWELL    51304441-175    

HONEYWELL    51107137-117    

HONEYWELL    51196654-100    

HONEYWELL    51196653-100    

HONEYWELL    51400712-100    

HONEYWELL    51204166-175    

HONEYWELL    51401201-100    

HONEYWELL    51401577  



You are welcome to make an inquiry


E-mail:


free@fenoux.com


Tel.:


+86 133 7698 4225


Skype:


+86 133 7698 4225


WhatsApp:


+86 133 7698 4225




Copyright © Hong Kong Saul Electric Co., Ltd. All Rights Reserved Sitemap

Follow Us
Disclaimers: All trademarks on the website are not owned by us. If there is any infrigement, wecan replace them at any time.