Home > Products > GE > 6KAF323003EA1 GE Programmable controller Brand new

6KAF323003EA1 GE Programmable controller Brand new

Extended Terminal Block IC694TBS132 comes with an

outer cover that is approximately ½-inch (13mm) deeper than Terminal Block IC694TBS032, to accommodate wires with thicker insulation, such as that typically used with AC I/O modules.

Inquire Now Next Product

Additional Information:

Brand： GE Model number：6KAF323003EA1

Colour：new Warranty: 1 year

Lead Time：3-day working day Country of origin: USA

Price: Please contact us Product weight：0.12kg

hipping Port: China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

6KAF323003EA1 GE Programmable controller Brand new

CPU sweep time increases during

overtemperature operation

When the operating temperature of the CPU exceeds the normal

operating temperature, system variable #OVR_TMP (%SA8) turns ON

(Fault group 24, error code 0x0001). When this occurs, the sweep time

periodically increases because the CPU executes a new task to read

the actual temperature reported by a temperature sensor. This

increase can be as much as 2 ms.

GBC in expansion rack may fail to power

Occasionally, a Series 90-70 GBC module located in an expansion

rack may fail to power up when power to that rack is cycled off/on. The

module’s OK light will flash and then all module lights will go off. Power

cycle the rack again to recover. (Note: This issue does not affect 90-30

GBCs.)

Possible Machine Edition software inability

to connect

Infrequently, an attempt to connect a programmer to an RX7i via

Ethernet will be unsuccessful. The normal connection retry dialog will

not be displayed. Rebooting the computer that is running the

programmer will resolve the behavior.

Don’t use multiple targets In a system in which the hardware configuration is stored from one

target and logic is stored from a different target, powering-up from

flash will not work. The observed behavior is that, following a power up

from flash, Machine Edition software reports hardware configuration

and logic "not equal".

Sequence Store failure When downloading projects with very large hardware configuration or

which use large amounts of user memory, it is possible to encounter a

“PLC Sequence Store Failure” error when writing the project to flash.

To work around this error, either or both of the following actions may

be helpful:

1. Perform an explicit clear of flash prior to performing the write.

2. Increase the operation timeout used by Machine Edition software

prior to performing the write. This is done by expanding the

Additional Configuration in the Inspector window for the target

controller, and adjusting the Request Timeout. The timeout may

need to be increased to as much as 60000 msec, depending on

the amount of memory used and the condition of the flash

memory

GE DS3800DMEC1B1B

GE DS3800DMEC1C1C

GE DS3800DMEC1D1D

GE DS3800DMPC

GE DS3800DMPC1E1C

GE DS3800DMPC1F1E

GE DS3800DMPK1B1B

GE DS3800DMPK1E1D

GE DS3800DOAA

GE DS3800DPLA1B1A

GE DS3800DPSS1B1B

GE DS3800DPSS1C1C

GE DS3800DPZA1D1D

GE DS3800DSHA1A1A

GE DS3800DSHA1A1B

GE DS3800DSQD1A1A

GE DS3800DSWA

GE DS3800DXRA

GE DS3800DXRA1C1C

GE DS3800DXRC

GE DS3800DXRC1

GE DS3800HACA

GE DS3800HACA1A1A

GE DS3800HACB

GE DS3800HADA

GE DS3800HADA1A1A

GE DS3800HADA1B1B

GE DS3800HAFA1B1D

GE DS3800HAFA-1D1E

GE DS3800HAIA1D1B

GE DS3800HAIA1E1D

GE DS3800HAIA1EID

GE DS3800HAIC1A1A

GE DS3800HAIC1A1A 6BA00C

GE DS3800HAIC1A1A6BA00C

GE DS3800HAIC1E1C

GE DS3800HARA1B1C

GE DS3800HCIB

GE DS3800HCIB1B

GE DS3800HCIB1B1C

GE DS3800HCID

GE DS3800HCM1A1B

GE DS3800HCMA1E1G

GE DS3800HCMB

GE DS3800HCMB1C1C

GE DS3800HCMC

GE DS3800HCMC1A1B

GE DS3800HCMC-1A1B

GE DS3800HCVA1H1G

GE DS3800HCVA1J1G

GE DS3800HDDD

GE DS3800HDID1A1A

GE DS3800HDRA

GE DS3800HDRA1B

GE DS3800HDRA1B1B

GE DS3800HDRC1A1A

GE DS3800HFPB1F1E

GE DS3800HFPC

GE DS3800HFPC1L1H

GE DS3800HFPE1D1C

GE DS3800HFPG1C1B

GE DS3800HFPG1D1B

GE DS3800HFPG1D1C

GE DS3800HFPG1D1D

GE DS3800HFPG1E1E

GE DS3800HFXA1F1D

GE DS3800HFXB

GE DS3800HFXB1G1C

GE DS3800HFXB1R1H

GE DS3800HFXC

GE DS3800HFXD

You are welcome to make an inquiry

E-mail:

free@fenoux.com

Tel.:

+86 133 7698 4225

Skype:

+86 133 7698 4225

WhatsApp:

+86 133 7698 4225

Related Products:

689E874G2 GE Programmable controller Brand new

5PY59JY3 GE Central control module Brand new

600-3498-0 GE Central control module Brand new