55-170204G002 GE Input module Brand new

Programmer version requirements ▪ Proficy* Machine Edition Logic Developer PLC 7.0 SIM5 or later  must be used for Release 6.75 new features. ▪ Proficy Machine Edition Logic Developer PLC 6.0 or later must be  used for Release 6.00 new features. ▪ Proficy Machine Edition Logic Developer 5.8 or later must be used  for Release 5.50 new features. ▪ Proficy Machine Edition Logic Developer 5.7 or later must be used  for Release 5.00 new features. ▪ Proficy Machine Edition Logic Developer 5.5 Service Pack 2 or later  must be used for Release 4.00 new features. ▪ Proficy Machine Edition Logic Developer 5.5 Service Pack 1 or later  must be used for Release 3.80 new features ▪ Proficy Machine Edition Logic Developer 5.5 or later must be used  for Release 3.50 new features. ▪ Proficy Machine Edition Logic Developer 5.0 Service Pack 3 HotFix  3 or later must be used for Release 3.10 new features. ▪ Proficy Machine Edition Logic Developer 5.0 Service Pack 3 or later  must be used for Release 3.00 new features. ▪ Proficy Machine Edition Logic Developer 4.5 or later must be used  for Release 2.56 new features. ▪ Proficy Machine Edition Logic Developer 4.0 SP3 Special 2 or later  must be used for Release 1.50 new features. ▪ Proficy Machine Edition Logic Developer 4.0 or later must be used  to configure and program the RX7i.  C Toolkit compatibility The C Toolkit for PACSystems is distributed with Proficy Machine  Edition Logic Developer. Updates can be downloaded from  http://www.ge-ip.com/support. C Toolkit Release 5.50 or later is required for LREAL data type support. C Toolkit Release 5.00 Build 16C1 or later is required when the  PACSystems CPU contains firmware Release 5.00 or later. Notes: C blocks that were built using C Toolkit versions earlier than  5.00 Build 16C1 must be recompiled using a newer toolkit  version for use with CPU firmware release 5.00 or higher. The Series 90 Toolkit (IC641SWP709/719) is not compatible  with PACSystems. Series 90-70 expansion rack  compatibility Series 90-70 expansion racks are supported by the PACSystems RX7i.  PACSystems RX7i CPUs and the RX7i Ethernet Module do not operate  in a Series 90-70 rack. Series 90-70 main rack compatibility Series 90-70 Main Racks cannot be used in a PACSystems RX7i  system.  PACSystems RX7i CPUs and the RX7i Ethernet Module do not operate  in a Series 90-70 rack. Series 90-70 module compatibility For a list of modules supported by the RX7i CPUs, refer to the  PACSystems RX7i Installation Manual, GFK-2223.

.