44B399855-002 GE Controller module Brand new

Brand： GE                 Model number：44B399850-002 

Colour：new                  Warranty:44B399855-002

Lead Time：3-day working day   Country of origin: USA

Price: Please contact us         Product weight：0.12kg

hipping Port: China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account 

44B399855-002  GE  Controller module Brand new 

DLAN/DLAN+ (Drives Local Area 

Network) Interface restrictions

PACSystems RX7i CPUs with firmware versions 1.50 or later support 

DLAN Interface, IC697BEM763 modules with firmware versions 3.00 

or later. You must ensure that you are using a valid version of the 

DLAN firmware because the CPU cannot check the DLAN’s firmware 

version. (The module’s firmware version can be found on a label 

attached to the EEPROM.)

If your RX7i application program needs to access the DLAN’s dual port 

memory, use the BUS READ and WRITE functions. When accessing a 

DLAN module, set the Region parameter on the function block to 1. 

(For the DLAN module, region 1 is predefined to be the module's 

entire dual port memory.)

The DLAN is only supported in the main RX7i rack. It is not supported 

in expansion racks.

Note: The DLAN Interface module is a specialty module with limited 

availability. If you have a DLAN system, refer to the 

DLAN/DLAN+ Interface Module User’s Manual, GFK-0729 for 

details.

Genius Bus Controller restrictions The following restrictions apply to GBCs in PACSystems RX7i:

▪ The minimum CPU sweep time will be gated by the time it takes 

the GBC to refresh its outputs and collect its inputs + 500 

microseconds. To obtain a smaller sweep time, use the SUSIO 

function block or place the GBCs in a scan set that has nondefault characteristics.

▪ If a %W reference address is used for COMMREQ status or 

return data, it must be in the range %W00001 - %W65536.

▪ Storing or clearing a hardware configuration containing two GBCs 

attached to the same Genius network may cause a Loss of 

Device fault for one of the GBCs. This is caused by the GBCs 

clearing their SBAs asynchronously. The user can safely ignore 

the Loss of Device fault.

PCM (to CPU) communications 

timeout

The PCM has a default backplane communications timeout value of 5 

seconds. After the PCM has sent a request to the CPU, the PCM 

applies this timeout while waiting on a response back from the CPU. In 

most cases, the CPU will respond well within the 5–second timeout; 

however, in certain instances the CPU can take longer than 5 seconds 

to respond. These cases are limited to LOADs or STOREs of program 

and/or configuration -especially if blocks in the program are larger than 

8 KBytes. Folders containing EXE blocks (again with *.EXE files >8 

KBytes) are most likely to cause problems. To ensure that the PCMs 

do not observe backplane timeouts, a file must be loaded (using termf) 

to the PCM. The file must be a binary file named CPU.ENV. The 

contents of this file are as below (all values are specified in 

hexadecimal):

Once the binary file CPU.ENV (below) is created, use termf to load 

CPU.ENV to the PCM. Then execute a soft reset of the PCM. After 

executing the soft reset, the PCM’s backplane communications 

timeout should be 10 seconds.

Note: A copy of the above CPU.ENV file can be obtained from 

http://www.ge-ip.com/support.

GE    DS3800DMEC1B1B    

GE    DS3800DMEC1C1C    

GE    DS3800DMEC1D1D    

GE    DS3800DMPC    

GE    DS3800DMPC1E1C    

GE    DS3800DMPC1F1E    

GE    DS3800DMPK1B1B    

GE    DS3800DMPK1E1D    

GE    DS3800DOAA    

GE    DS3800DPLA1B1A    

GE    DS3800DPSS1B1B    

GE    DS3800DPSS1C1C    

GE    DS3800DPZA1D1D    

GE    DS3800DSHA1A1A    

GE    DS3800DSHA1A1B    

GE    DS3800DSQD1A1A    

GE    DS3800DSWA    

GE    DS3800DXRA    

GE    DS3800DXRA1C1C    

GE    DS3800DXRC    

GE    DS3800DXRC1    

GE    DS3800HACA    

GE    DS3800HACA1A1A    

GE    DS3800HACB    

GE    DS3800HADA    

GE    DS3800HADA1A1A    

GE    DS3800HADA1B1B    

GE    DS3800HAFA1B1D    

GE    DS3800HAFA-1D1E    

GE    DS3800HAIA1D1B    

GE    DS3800HAIA1E1D    

GE    DS3800HAIA1EID    

GE    DS3800HAIC1A1A    

GE    DS3800HAIC1A1A 6BA00C    

GE    DS3800HAIC1A1A6BA00C    

GE    DS3800HAIC1E1C    

GE    DS3800HARA1B1C    

GE    DS3800HCIB    

GE    DS3800HCIB1B    

GE    DS3800HCIB1B1C    

GE    DS3800HCID    

GE    DS3800HCM1A1B    

GE    DS3800HCMA1E1G    

GE    DS3800HCMB    

GE    DS3800HCMB1C1C    

GE    DS3800HCMC    

GE    DS3800HCMC1A1B    

GE    DS3800HCMC-1A1B    

GE    DS3800HCVA1H1G    

GE    DS3800HCVA1J1G    

GE    DS3800HDDD    

GE    DS3800HDID1A1A    

GE    DS3800HDRA    

GE    DS3800HDRA1B    

GE    DS3800HDRA1B1B    

GE    DS3800HDRC1A1A    

GE    DS3800HFPB1F1E    

GE    DS3800HFPC    

GE    DS3800HFPC1L1H    

GE    DS3800HFPE1D1C    

GE    DS3800HFPG1C1B    

GE    DS3800HFPG1D1B    

GE    DS3800HFPG1D1C    

GE    DS3800HFPG1D1D    

GE    DS3800HFPG1E1E    

GE    DS3800HFXA1F1D    

GE    DS3800HFXB    

GE    DS3800HFXB1G1C    

GE    DS3800HFXB1R1H    

GE    DS3800HFXC    

GE    DS3800HFXD    

You are welcome to make an inquiry

E-mail:

free@fenoux.com

Tel.:

+86 133 7698 4225

Skype:

+86 133 7698 4225

WhatsApp:

+86 133 7698 4225